Avatar

Nathan McGee

  • Total activity 325
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 172

Activity overview

Latest activity by Nathan McGee
  • Avatar

    Nathan McGee created an article,

    Vaisala Weather Station

    Ensure that the THREAD is turned on and connected to the Weather Station via one of its Device ports. 1. Navigate to the Connectivity Module 2.  Press the  button directly on a THREAD to add a Dev...

  • Avatar

    Nathan McGee created an article,

    Turner Designs - C3 Fluorometer

    Ensure that the THREAD is turned on and connected to the C3 via one of it's Device ports. 1. Navigate to the Network Module 2.  Press the  button directly on a THREAD to add a Device to it. If you...

  • Avatar

    Nathan McGee created an article,

    TE Connectivity KPSI Analog Piezometer Device

    Ensure that the THREAD is turned on and connected to the Piezometer via one of it's Device ports. 1. Navigate to the Network Module 2.  Press the  button directly on a THREAD to add a Device to it....

  • Avatar

    Nathan McGee created an article,

    sensemetrics Smart Relay

    How to Add a Smart Relay Ensure that the THREAD is turned on and connected to the Relay via one of its Device ports. 1. Navigate to the Connectivity module 2.  Press the  button directly on a THRE...

  • Avatar

    Nathan McGee created an article,

    sensemetrics Demo Devices

    Overview Demo sensors are virtually created sensors that can emulate an actual sensemetrics supported sensor by providing real time readings. These sensors can be used for demonstrating what a sens...

  • Avatar

    Nathan McGee created an article,

    RST MEMS Tilt Meter - Digital

    Overview RST’s MEMS In-Place Tilt Meters measure tilt in either one or two axial planes perpendicular to the surface of the base plate. The digital bus allows several tiltmeters to be daisy-chained...

  • Avatar

    Nathan McGee created an article,

    RST In-place Inclinometer - Digital

    Adding a RST IPI Ensure that the THREAD is turned on and connected to the IPI via one of it's Device ports. 1. Navigate to the Network Module 2.  Press the  button directly on a THREAD to add a De...

  • Avatar

    Nathan McGee created an article,

    Roctest Fiber Optic Readout

    Ensure that the THREAD is turned on and connected to the Fiber Optic Readout via one of it's Device ports. 1. Navigate to the Network Module 2.  Press the  button directly on a THREAD to add a De...

  • Avatar

    Nathan McGee created an article,

    Roctest RT-VLOG

    This article will cover the following topics regard the Roctest V-Logger Adding a Roctest V-Logger to an Existing THREAD. Configure the THREAD to communicate directly with the V-Logger. MUX Conf...

  • Avatar

    Nathan McGee created an article,

    Petrosense DHP-485

    Ensure that the THREAD is turned on and connected to the DHP-485 via one of it's Device ports. 1. Navigate to the Network Module 2.  Press the  button directly on a THREAD to add a Device to it. I...