SENSR SNA1 (SENSRnet)

Adding a SENSRnet Server

Step 1: Go to Network and select "Add Connection"

Screen_Shot_2017-08-18_at_5.03.27_PM.png

Step 2: Type "SNA1 SENSRnet Server" in the option box and select the SENSRnet once it autocompletes. 

Screen_Shot_2017-08-18_at_4.54.08_PM.png

Step 3: Type in the Serial number of the SNA1. The serial number is located on the back of the SNA1 near the power input.

Screen_Shot_2017-08-18_at_4.54.35_PM.png

Step 4: Press Save to add the SENSRnet to the network.

Screen_Shot_2017-08-18_at_4.57.34_PM.png

The Connection should now turn green to indicate that it has properly connected.

 

Step 5: Configure CX1's: Click the Edit Configuration button to add the CX1's to the network.

*Click on the SENSRnet within the connection's column if you have exited the configuration screen.

 

Screen_Shot_2017-08-18_at_4.57.56_PM.png

 

  • Select the number of CX1's within the SENSRnet
  • Add each serial number to the list (Serial number is listed on back of each CX1)
  • Click Save.

 

SENSRnet configuration is now complete. The network will begin to take readings once a minute for each sensor.

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.